Getting Started: FurLuxe Pro
The FurLuxe Pro is Prima’s highest-performance injection system — built for high-volume shops running all day. More rinse power, integrated cooling fan, and heavier-duty components throughout. Setup is the same as the FurLuxe, with a few Pro-specific notes.
What’s in the Box
FurLuxe Pro main unit (fully assembled) · High-flex fan cone nozzle · Flexible wash hose with application wand · SudCell shampoo bottle with hookup line · Faucet aerator to hose adapter kit · Water hookup line · Power cord · Window cling
Connect Water Supply
Choose Your Connection
The Pro connects to fresh water via faucet aerator adapter, hose bib, or a PrimaPod tank. For high-volume shops, a dedicated water line is recommended for uninterrupted flow.
Connect to H2O Port
Connect the water supply line firmly to the H2O port on the rear of the machine. The machine controls water flow — leave the supply source open.
Connect Hoses
Water Supply → H2O Port
Connect the water supply line to the H2O port.
SudCell Line → MIX Port
Connect the SudCell shampoo bottle hookup line to the MIX port and attach the other end to the SudCell cap.
Sprayer → WAND Port
Connect the flexible wash hose and spray wand to the WAND port.
Power
Connect the power cord to the rear of the machine and plug into a GFCI outlet.
Shampoo Setup — Dilution Guide
The FurLuxe Pro uses the same 16:1 baseline dilution ratio as all FurLuxe machines. Pre-dilute shampoos with higher ratios in the SudCell before use.
| Shampoo Ratio | 16oz SudCell | 64oz SudCell | 128oz SudCell |
|---|---|---|---|
| 16:1 | Do not dilute | Do not dilute | Do not dilute |
| 24:1 | 12oz shampoo | 48oz shampoo | 96oz shampoo |
| 32:1 | 8oz shampoo | 32oz shampoo | 64oz shampoo |
| 40:1 | 6.7oz shampoo | 26.7oz shampoo | 53.3oz shampoo |
| 48:1 | 5.3oz shampoo | 18.7oz shampoo | 37.3oz shampoo |
| 64:1 | 4oz shampoo | 16oz shampoo | 32oz shampoo |
Priming the System
Power On
Switch on the machine. The integrated cooling fan will activate — this is normal and keeps the Pro running cool during extended sessions.
Prime the Water Line
Press the wand trigger to let air purge. Loosen the nozzle slightly for a stream rather than a spray. Once spraying steadily, release — the machine will shut off automatically.
Prime the Mix Line
Switch to Apply mode and spray again with the nozzle slightly loose. Once shampoo flows, tighten the nozzle to build pressure and widen the spray cone.
Daily Use
Apply Shampoo
Set to Apply mode. High-power injection delivers oxygenated shampoo deep into the coat, lifting dirt and dander from root to tip.
Let It Sit
Allow suds to dwell for a few minutes for maximum cleaning effectiveness — especially on dense or double coats.
Rinse
Switch off Apply mode to rinse with full water pressure. Allow a few seconds for shampoo to purge from the lines.
End of Day — Cleanup
Wipe down the exterior with a soft cloth to remove water, shampoo, or residue.
Purge the shampoo line: Place the SudCell intake tube in clean water. Run Mix mode for 15–30 seconds until only clean water flows through. Keeps lines clear and ready for next use.
Power down and store in a clean, dry area.